Build your own PC,You will provide a comprehensive and detailed manual documenting the step-by-step process for building a computer using the components provided, use the information “Build a Computer from Scratch.” The manual will be used by entry-level technicians, so it should be clear, concise, and formatted using IEEE citation style, with screenshots of each step from and for Video Cards only,Your manual should be similar to step-by-step instructions on How to Change the Oil in Your Car. Note carefully how in this example, not only is each step described individually, and in detail, but also there is a visual representation of each step. You should model your submission along the same lines. Keep in mind that your manual will be used as a guide for new technicians.The manual should not document how to complete the section; rather, it should provide detailed instructions on how to build an actual computer for a potential customer.”After properly grounding yourself, pick up the motherboard and place it inside the area where the motherboard will sit in the case. Align the screw holes on the motherboard with the screw holes on the case. Use appropriate screws to mount the motherboard inside the case, making sure not to scratch the surface of the motherboard.”To learn about the required parts which must be present in your submissions, and to learn how you will be assessed on this assignment, please take a moment to review you work.The manual will be submitted in three separate parts. Part 1 addresses Sections 1-5 of the overall manual, Part 2addresses Sections 6-10, and Part 3 addresses Sections 11-12.PC Build & Manual Part 1:1. Workspace Preparation 2. Installing Motherboard 16x PCI Express slot for video card supportM.2 Storage supportSupport for 64-bit processorsDual channel memory supportSupport for up to 64 GB of mem3. Installing Power Supply SATA power supplyA power connector that has 15 pins and provides 3.3, 5, and 12 volts.Input 115V vs. 220VOutput 5.5V vs. 12V24-pin motherboard adapterWattage ratingNumber of devices/types of devices to be powered4. Installing CPU Install the i7-975 3.33GHz processorInstall the Intel heat sink and fan, socket 1366Connect the CPU fan connector to the motherboard5. Installing RAM Install DDR4 RAM DDR4 accepts eight consecutive 64-bit words per bus clock cycle.DDR4 operates at 1.2 volts at bus frequencies between 1066-2133 MHz. The internal memory frequency is about one-tenth that of the bus frequency (100-266 MHz).DDR4 reduces the demand for power.DDR4 is not compatible with earlier types of random access memory (RAM) because of the different signaling voltages, physical interface, and other factors.DDR4 theoretically allows for DIMMs of up to 512 GB in capacity, compared to the DDR3’s theoretical maximum of 128 GB per DIMM.PC Build & Manual Part 2:6. Installing Hard Drive SATA devices use a special 15-pin power connector that supplies 3.3, 5, and 12 volts7. Installing Optical Drive Blu-ray Disc (BD) – A single layer Blu-ray disc holds 25 GB; a double layer disc holds up to 50 GB. Experimental 20 layer discs can hold up to 500 GB.Digital Versatile Disc (DVD)- DVD speeds use a multiple of 1.35 MBps (1x = 1.35 MBps, 2x = 2.7 MBps, etc.) or 11 Mbps (1x = 11 Mbps, 2x = 22 Mbps, etc.).Compact Disc (CD)- Hold about 737 MB of data with error correction or 847 MB total.8. Installing Video Card Install the secondary video card in the next open expansion slot.Link the two video cards together using the bridge clip.Connect any additional power connectors to the video card(s) (e.g., 6-pin or 8-pin auxiliary power).9. Connecting Monitors, Keyboard, and Mouse Install Keyboard, mouse, scanner, projector 10. BIOS Configurationinput/Output System (BIOS)The BIOS is a legacy program stored in a read-only memory (ROM) chip that the CPU automatically loads and executes when it receives power. Important things to know about the BIOS are:The BIOS program controls the startup process and loads the operating system into memory.The BIOS is firmware.You should frequently check for BIOS updates from the manufacturer. Updating the BIOS (called flashing the BIOS) makes new features available, such as allowing the BIOS to recognize newer hardware devices.Most BIOS chips vary from 265 KB to 1 MB in size.Video cards include a BIOS chip on the device. These devices have their own ROM chip called an option ROM (OpROM).PC Build & Manual Part 3:11. Installing Windows 10First, we need to consider the storage device you want to install Windows on. There are several options to choose from: internal hard disk drive, external hard disk drive, hot swappable internal hard drive, internal solid state drive, external flash drive, or an internal or external RAID array. Each type of storage device has its advantages and disadvantages. Install windows12. Configuring Critical Windows Features (10.0, 11.0 12.0, and 13.0)Manage files on window, shared folders, windows file location, windows system tool, preferences and settings user and groupYou will provide a comprehensive and detailed manual documenting the step-by-step process for
building a computer using the components provided, use the information “Build a Computer
from Scratch.” The manual will be used by entry-level technicians, so it should be clear, concise,
and formatted using IEEE citation style, with screenshots of each step from and for Video Cards
only,
Your manual should be similar to step-by-step instructions on How to Change the Oil in Your
Car. Note carefully how in this example, not only is each step described individually, and in
detail, but also there is a visual representation of each step. You should model your submission
along the same lines. Keep in mind that your manual will be used as a guide for new technicians.
The manual should not document how to complete the section; rather, it should provide detailed
instructions on how to build an actual computer for a potential customer.
“After properly grounding yourself, pick up the motherboard and place it inside the area where
the motherboard will sit in the case. Align the screw holes on the motherboard with the screw
holes on the case. Use appropriate screws to mount the motherboard inside the case, making sure
not to scratch the surface of the motherboard.”
To learn about the required parts which must be present in your submissions, and to learn how
you will be assessed on this assignment, please take a moment to review you work.
The manual will be submitted in three separate parts. Part 1 addresses Sections 1-5 of the overall
manual, Part 2 addresses Sections 6-10, and Part 3 addresses Sections 11-12.
PC Build & Manual Part 1:
1. Workspace Preparation
2. Installing Motherboard
•
•
•
•
•
16x PCI Express slot for video card support
M.2 Storage support
Support for 64-bit processors
Dual channel memory support
Support for up to 64 GB of mem
3. Installing Power Supply
SATA power
supply
A power connector that has 15 pins and provides 3.3, 5, and 12
volts.
•
Input 115V vs. 220V
•
•
•
•
Output 5.5V vs. 12V
24-pin motherboard adapter
Wattage rating
Number of devices/types of devices to be powered
4. Installing CPU
Install the i7-975 3.33GHz processor
Install the Intel heat sink and fan, socket 1366
Connect the CPU fan connector to the motherboard
5. Installing RAM
Install DDR4 RAM
•
•
•
•
•
DDR4 accepts eight consecutive 64-bit words per bus clock cycle.
DDR4 operates at 1.2 volts at bus frequencies between 1066-2133 MHz. The
internal memory frequency is about one-tenth that of the bus frequency (100-266
MHz).
DDR4 reduces the demand for power.
DDR4 is not compatible with earlier types of random access memory (RAM)
because of the different signaling voltages, physical interface, and other factors.
DDR4 theoretically allows for DIMMs of up to 512 GB in capacity, compared to
the DDR3’s theoretical maximum of 128 GB per DIMM.
PC Build & Manual Part 2:
6. Installing Hard Drive
SATA devices use a special 15-pin power connector that supplies 3.3, 5, and 12 volts
7. Installing Optical Drive
•
•
Blu-ray Disc (BD) – A single layer Blu-ray disc holds 25 GB; a double layer disc
holds up to 50 GB. Experimental 20 layer discs can hold up to 500 GB.
Digital Versatile Disc (DVD)- DVD speeds use a multiple of 1.35 MBps (1x =
1.35 MBps, 2x = 2.7 MBps, etc.) or 11 Mbps (1x = 11 Mbps, 2x = 22 Mbps,
etc.).
•
Compact Disc (CD)- Hold about 737 MB of data with error correction or 847
MB total.
8. Installing Video Card
•
o
o
•
Install the secondary video card in the next open expansion slot.
Link the two video cards together using the bridge clip.
Connect any additional power connectors to the video card(s) (e.g., 6-pin or 8pin auxiliary power).
9. Connecting Monitors, Keyboard, and Mouse
Install Keyboard, mouse, scanner, projector
10. BIOS Configuration
The BIOS is a legacy program stored in a read-only memory (ROM) chip that
the CPU automatically loads and executes when it receives power. Important
things to know about the BIOS are:
•
input/Output
System (BIOS)
•
•
•
•
PC Build & Manual Part 3:
11. Installing Windows 10
The BIOS program controls the startup process and loads the
operating system into memory.
The BIOS is firmware.
You should frequently check for BIOS updates from the
manufacturer. Updating the BIOS (called flashing the BIOS)
makes new features available, such as allowing the BIOS to
recognize newer hardware devices.
Most BIOS chips vary from 265 KB to 1 MB in size.
Video cards include a BIOS chip on the device. These devices
have their own ROM chip called an option ROM (OpROM).
First, we need to consider the storage device you want to install Windows on. There are several
options to choose from: internal hard disk drive, external hard disk drive, hot swappable internal
hard drive, internal solid state drive, external flash drive, or an internal or external RAID array.
Each type of storage device has its advantages and disadvantages. Install windows
12. Configuring Critical Windows Features (10.0, 11.0 12.0, and 13.0)
Manage files on window, shared folders, windows file location, windows system tool,
preferences and settings user and group
Purchase answer to see full
attachment
Why Choose Us
- 100% non-plagiarized Papers
- 24/7 /365 Service Available
- Affordable Prices
- Any Paper, Urgency, and Subject
- Will complete your papers in 6 hours
- On-time Delivery
- Money-back and Privacy guarantees
- Unlimited Amendments upon request
- Satisfaction guarantee
How it Works
- Click on the “Place Order” tab at the top menu or “Order Now” icon at the bottom and a new page will appear with an order form to be filled.
- Fill in your paper’s requirements in the "PAPER DETAILS" section.
- Fill in your paper’s academic level, deadline, and the required number of pages from the drop-down menus.
- Click “CREATE ACCOUNT & SIGN IN” to enter your registration details and get an account with us for record-keeping and then, click on “PROCEED TO CHECKOUT” at the bottom of the page.
- From there, the payment sections will show, follow the guided payment process and your order will be available for our writing team to work on it.